Installation of terrace elements:

Install the terrace elements in a slope of 2% due to the drainage required. Take care of a frost resistant and sustainable subsurface. We recommend open joints. Always apply joint dividers such as joint crosses with a width of 3 mm. As edge boarder you can use curbstones or customary draining aluminum profiles.

GARDEN TERRACES, ENTRANCES, PATHS:
INSTALLATION ON RUBBLE
with compressed bed

  • Rubble sub floor (grains of 2-5 mm), thickness approximately 50 to 60 mm

  • Slope approximately 2%

  • Frost resistant subsurface (grains of 0-32 mm) such as gravel, lava, crushed stone. Thickness = 20 to 30 cm, compressed with plate compactor.

GARDEN AND ROOF TERRACES, BALCONIES, RECONSTRUCTION

Installation on concrete
with bearings

  • Concrete slab with 2% slope to prevent standing water.

  • In case of surface irregularities: Level out with spacers at the bearings.

  • Terrace elements are laid on the bearings loosely.

     

BALCONY, ROOF TERRACES:
INSTALLATION ON CONCRETE PAVEMENT
with mortar bags

  • Fill mortar into appropriate plastic bags and close afterwards.

  • Position the filled bags on the sub floor.

  • Lay the terrace elements before the mortar starts setting.

     

Accessories effective 11/2010 >download